- Scada Remote Control
- Mild steel
XRC 75-55 Parcel Imaging System is reckoned for its ergonomic appearance. This machine is 1015 mm wide, 1475 mm high and 2150 mm long. Its tunnel size is 755 mm x 555 mm. Conveyor of this product can operate 0.20 m in every second. This conveyor can bear 165 kg load. XRC 75-55 Parcel Imaging System consumes 230 VAC power and its maximum frequency is 60 Hz. Its conveyor is 810 mm long. Operating temperature of this machine ranges between -20 degree C to 60 degree C. Maximum relative humidity of this machine is 95%. This machine can maintain upward and vertical direction of X ray. Long working life, low maintenance cost and user friendly mechanism are its key aspects.
Its SRC-SCADA software based remote monitoring system enables viewing of its alarm function on the PC of customers. Moreover, its audio visual alarm indicator shows data related to separate zone detection of walk through type metal detector.
Advantages of Scada Remote Control :-
- The real time remote access function of this system ensures higher security for areas with average security arrangement. During its utilization in jailhouses, the security personnel provides required command from bullet protected cabinets by using a diaphone unit of having maximum 100m of cable connectivity and + IRDA remote controlling or pilot facility.
- The data logger of this remote control assists in statistical study of current computer recorded time of a specific event via computer.
- The walk through metal detector with the CCTV relay output based operating function (the standard model of all the WTMD has this specific attribute) ensures better surveillance system by security personnel by pinpointing on dubious visitors.
(Note: SRC is accessible with IP protocol/Ethernet connectivity through remote PC).
2 meter,8 meter,6 meter,4 meter
3 to 100khz
Metal Detector Type
Walk Through Metal Detector
- 1 Week